E-mail Login Form
User ID
Password
 
 
Products Category
 
Our Office
Sales Person Contact Hp / WA :
Hendro Tampubolon         (0811-6930-099)
Yesin Ardila (0811-6930-100)
Andreas (0811-6930-101)
Delfan Taurus (0811-6930-102)

Website References :
http://www.belzona.com/
 
Online Support
Online Support Information
 
Products Detail Information
Belzona & Noverox - Belzona 1000 Series
Belzona 1251 (Heat Active Metal)

A durable, single component metal repair composite based on a silicon alloy blended with a heat activated epoxy resin. Designed to repair and protect metal surfaces suffering from Corrosion under Insulation (CUI), Belzona 1251 (HA-Metal) can be easily applied by spatula, applicator or brush.

This heat activated material can be applied directly onto hot surfaces (70-150C / 158-302F) with minimal surface preparation avoiding production downtime. Once cured, this solvent-free repair composite provides outstanding corrosion protection.

Belzona 1251 (HA-Metal) is ideally suited to be over coated with Belzona 5851 (HA-Barrier) to ensure long-lasting performance.

Key benefits:

  • In-situ application to live equipment operating at high temperature with minimal surface preparation
  • Multipurpose durable metal repair composite
  • Single pack system, no weighing or mixing required
  • Reduced health and safety risks as it is solvent-free
  • Fast cure allowing equipment to be re-insulated with minimum delay
  • Excellent corrosion protection
  • Impact and abrasion resistance
  • Good chemical resistance against a wide range of chemicals
  • Excellent adhesion to metals including stainless steel, carbon steel, aluminium, brass and copper
  • Does not corrode

Applications for Belzona 1251 (HA-Metal) include:

  • Repair and prevention of Corrosion under Insulation (CUI)
  • Resurface of pitted metal surfaces
  • Repair of thin wall defects
  • Bonding of doubler plates
  • Leak sealing of pipework
Key technical data:
Working life at 25C (77F)Unlimited*
*cure will not commence until the product is heated
Time to mechanical cure 100C (212F)1 hour
Tensile shear adhesion (ASTM D1002)2,200 psi (15.2 MPa) after cure at 100C (212F) applied to clean, ground steel
Compressive strength (ASTM D695)18,100 psi (124.8 MPa) after 7 days cure at 100C (212F)
Temperature resistance180C (356F)
Bonds toAluminium, copper, steel, stainless steel, cast iron, and other metals
Typical applicationsRepair and protection of CUI problems, leak repairs, bonding, filling and many more
Unit size750g, 5kg. Unit sizes may vary locally
Availability*Global

* All products are subject to regional restrictions. Check with your local Distributor for more information





More information:

For more information about Belzona 1251 (HA-Metal) contact us or find your local distributor.

You can apply to join Belzona Connect to access additional information including SDS and instructions for use.

 
More Products...
copyright ©2019 PT. MTP
all rights reserved.